-->

  • BEAT MAKING TIPS


    If you ever listened to a DJ doing incredible mixes between two songs, it's because they just know the song. They know where all the parts of the song are such as the verse, chorus, intro, and outro. Because of this, they know when it's the right time to start mixing in the next song and how to make the mix sound great. It's almost as if the DJ was part of the team when that song was produced.

    The reason why a DJ knows certain songs so well is because they study music. Not in the sense that they went to college to learn music, but rather they pick apart songs when they listen to them, so in a way they are essentially a student of music.

    As a beatmaker, it's very important that you do the same thing. You should know some of the classic Hip Hop tracks all the way back to the early 1980s, as well as most of the songs that were sampled over the years, like Impeach the President and Funky Drummer. Some may argue that you don't need to know all of that history, but I think you do. If you were to listen to old school Rap music and study how the producers, rappers, and deejays back then did what they did, it will open up a whole new world to you.

    If you were to look back at the 1990s of Hip Hop, you can tell that the producers at the time had a heavy influence from songs in the 1980s. The drums were hard and a lot of breakbeats were used, which is what transitioned to the 1990s style of music.

    Bars

    With Hip Hop beats, most of the time you will hear 4-bar loops. Whichever beat making program you use, just take a look and you will see a numbered grid that shows you what bar you're on. Bar counts are designed like this:1-2-3-4, 1-2-3-4, 1-2-3-4, 1-2-3-4. That's 4 bars. As you can see, there are 4 parts to each bar. It's pretty standard, but you can also extend your loop to 8, or 16, or any number you would like. If you're still not sure about how bars work in the program you're using, then check out the manual of the program, as it will most likely explain it.

    Making a Loop

    As a new student who is just beginning, you will always want to start your project first with a drum loop. The reason for this is because it allows you to get used to timing and tempo. It may seem simple to some, but there are people that have trouble staying on beat when they want to play certain instruments, such as the piano. By having a drum loop set up first, then all you have to do is follow the loop and stay on beat.

    Step Sequencing

    If you take a look at some old school drum machines, they all had a feature called Step Sequencer. It's a feature that makes it dead simple to create a loop, especially for drums. This is why I recommend you to use FL Studio as your first DAW. By using a step sequencer, all you have to do is click on where you want your drums to be on the sequencer line.
    This is how it works:
      
     As you can see, it's very simple. In this example there are 16 steps and 4 instruments: kick, clap, hat, and snare. So all you have to do is decide where you want those four instruments to be. You just have to set your tempo and then as the software loops over and over, you can place the hits wherever you wish.

    The great thing about doing it this way is that it's so easy to edit your loop, like if you want to move the position of where the instruments are.

    Don't Worry About Creating a Full Song

    A common problem with someone that is new to beat making is that they get frustrated when their beat sounds nothing like that of a popular song they know well. It could be for various reasons, but most likely one of those reasons is because they are focusing on making a full song rather than just a loop.

    When you listen to some of your favorite Hip Hop tracks, you must pick it apart and try to hear each loop that makes up the full song. Making a beat is done in stages, so that is why working on a simple loop is absolutely necessary first. Even if it's just a drum loop, at least you have a foundation for a full song or full instrumental.

    So when you first start, just create a drum loop and make it sound as good as possible. Once you do that, then you can slowly add in other instruments as you progress to a complete beat.

    Making The Beat

    When creating your beat, you must first decide what you want the final product to be. Is it going to be a beat that you sell to a rapper? Is it going to be a beat that you put together with other beats as an instrumental album?

    One of the most common mistakes I hear all the time with beat makers is that they make beats without thinking further ahead. I'm guilty of this too, but it's only natural since making beats is all about being creative and making it sound great. Beat makers aren't necessarily producers, so the beat is always the first thought, where as a producer is always worried about the overall product.

    If you want to make a beat just as an instrumental, then the sky's the limit. You can add scratching, vocal snippets, and whatever else you can think of. On the other hand, if you wish to make a beat for a rapper to record their vocals over, then you have to step back and think about how you want to approach it.

    The first thing you should do is think about open space. One of the best techniques I've ever heard was from the 1990s when beats would have a hook and then when the verse part came in, the hook part was still there, but it was filtered out. It was a common technique.
     Another technique is to simply remove certain instruments from the beat when it's time for the vocals.

    It's true that there are plenty of Hip Hop beats that had all sorts of sounds and instruments playing throughout the beat, even with the vocals on top, but it doesn't always work.

    Bass lines Are Important, But Not Always

    A very annoying step in the beat making process is that of the bass line. Let's face it - bass is not glamorous. It just sits there and thickens the beat, but if you really listen to it, it's very important. If you were to listen to some of your favorite songs but with the bass lines removed, they would sound completely different.

    I always recommend that bass lines be added to a beat, but there are times when it's just not needed, or very little. You could add an 808 kick drum to your beat, and have that play on the first kick of the first bar, and that alone would be enough.

    If you do add a bass line then the simplest way is to follow the kick, and maybe even have a higher note on the 4th bar:



    All you have to do is get the bass note to be at the same key as the lead instrument (and make sure they sound great together), then just follow the first kick of each bar. Once you do that then play around with other bass notes and see what fits and what doesn't. Be creative!play around with other bass notes and see what fits and what doesn't. Be creative!


    Continues! subscribe so that u wont miss any
  • GET A FREE BEAT

    0
    Twitter
    0
    Instagram
    0
    Facebook
    0
    Behance

    Nashe Kelz

    Nashe Kelz is a music producer, beat maker/producer, app/web developer from the H-Town (Harare, Zimbabwe). All this comes within the same individual. His work is just different from the rest he has managed to stand out of the crowd and started making something of his own for instance his beats, they're just exquisite.
    Read more.

    Me

    My Professional Skills

    Graphic Design 90%
    App Development 25%
    Producer 95%

    EMAIL

    info@nashekelz.com
    beats@nashekelz.com

    PHONE

    +263 7735 63840
    +263 7339 63435