-->

  • HOW TO MAKE BEATS


    In this section, I will explain how to make beats, more my way. But you don't have to follow my ways; you can definitely get a good idea on how you can incorporate it into your own work flow. 

    For years I've always started with drums first. This allowed me to get into the right mindset and "vibe", plus it also acted as a guide as I added other instruments while the drum track was looping. It's a great way to start your beat, but it's not the only way. 
    This may seem a bit more complicated for those that are not used to it, but you can also do drums last. I know it sounds weird to some, but it all depends on what you want to do with your beat. 

    Let's say you have a sample that you want to chop up into four parts (1 part for each bar) and have it as a 4-bar loop. This can be accomplished easily since it matches up at the start of each bar. The same can be done if you're using virtual instruments, as long as you're putting the sounds at the beginning of each bar. As you keep adding parts like this, then you'll eventually have a few tracks of instruments that sound pretty much complete and all you have to do now is add the drums. 
    One trick that you can also do is use the metronome as your guide instead of the drums. All DAWs have a metronome count-in that can also be played as you are recording, which of course will help you stay on tempo. 

    The Drum Track 
    You must always remember that the drums are the backbone of your beat. Without drums, you beat wouldn't actually be a beat, rather it would be instruments just blended together. How you do those drums are very important, so make sure your drum track always sounds dope. 

    like to keep my drums simple with a kick, snare, and hat. You can add in toms and cymbals later on, but the "meat" of it is just those three drum sounds. 
    As for the pattern, it all depends on the type of beat you're trying to make. If it's a laid-back beat then of course you won't want to have your drum track be a crazy pattern, so it's best to keep it simple. Even for faster tempo beats, you don't need a busy pattern because remember this is Hip Hop. You're not making an EDM-style beat! 

    Your best bet is to always do kick-snare, kick-snare, and the hat all the way through. That's a typical drum beat with a 4/4-time signature, which is pretty much the default for most beats. You could definitely leave your drum pattern like that, but you can also just add in an extra kick here and there, as well as the snare. What's great about drums is that you can do little tricks to give it a bit more flavor. 

    Instead of just having a kick and snare, you can also add a pre-kick or pre-snare, which is the same sound but at a lower volume, and it can be thrown into your pattern wherever you feel it sounds good. Most likely they will sound great if you place them just before the main kick or snare, but it's just a matter of preference. Normally I leave my hats as a standard pattern, but they can be changed up as well with just slight variations.

    Blending Samples Together 
    A lot of the most famous Hip Hop beats of all time were put together by sampling entire loops, rather than chopping them up into individual sounds. I didn't know this when I first became a fan of Rap music but when I leant how those beats were done, I thought it was great that those producers were able to find a really good sample and use it as a full beat, but it also seemed too easy. Either way, the beats sounded great and that's why they were so popular, and really that's all that matters. 

    But a lot of beats are done with the use of one main sample, meaning that it's a sample from one source. Beatmakers will sample a certain song, chop it up and make a beat from it, but not many will take it a step further and add samples from other songs, even from other artists. 
    I try to do the same thing when I'm making a beat. I may not sample from dozens of songs, but many times I will use one main sample and then add in smaller samples from other sources, and it makes a huge difference. By doing it like this, it really changes the way the beat sounds because it's not just one sample that's being flipped, and it gives the beat a different sound altogether. 

    The same technique can be used when using virtual instruments. There are many times when I will use a synth from a Cakewalk VST plug-in such as a Rhodes piano, and then I will also use a synth from Native Instruments, like strings or a pad lead. 

    Synths and Samples as One 
    Layering various sound sources together is a great technique, but what about samples and synths together? It works, and it's a really good way to get a unique sound. 

    One trick I like to do is I have a sample as my main lead track. I can leave it like that, or I can also add a virtual instrument to compliment my lead. So what I usually do is I will load up something like piano, strings, or a pad, and just keep playing certain notes until it matches the same key as my lead sample. Once I know the proper key then all I have to do is get creative and play out a pattern. 

    The benefit of adding a synth to a sample is that it changes the way everything sounds, but it also gives the option of dropping out the sample at certain spots and have just the synth playing, just to change it up. The main thing you must remember is that the synth must be in the right key, otherwise you will have a hard time getting it to sound right. 

    Finishing It Off with The Bassline 
    Just as with the drums, sometimes I will start my bassline first, but many times I add it lasts. Basslines are tricky and many beat makers don't like doing them for obvious reasons, but I always find the best thing to do, just as with the synth I mentioned previously, is to get it in the right key. 

    The thing with basslines is that most of the time you can cheat, meaning that you don't need a fancy pattern, but just something that will fill in that low-end. You could have a base hit at the beginning of each bar and build from there, or you can play a pattern, most likely something that follows the lead instrument. 

    Let's say you have a lead instrument that has a certain pattern. All you have to do is make a bassline that follows that same pattern, but the tricky part is to get the bass to sound in tune with the lead. Once you get that right bass note, then you're good to go. You can keep the pattern the same or just alter it a bit, but the main thing is the key - it's very important.
  • GET A FREE BEAT

    0
    Twitter
    0
    Instagram
    0
    Facebook
    0
    Behance

    Nashe Kelz

    Nashe Kelz is a music producer, beat maker/producer, app/web developer from the H-Town (Harare, Zimbabwe). All this comes within the same individual. His work is just different from the rest he has managed to stand out of the crowd and started making something of his own for instance his beats, they're just exquisite.
    Read more.

    Me

    My Professional Skills

    Graphic Design 90%
    App Development 25%
    Producer 95%

    EMAIL

    info@nashekelz.com
    beats@nashekelz.com

    PHONE

    +263 7735 63840
    +263 7339 63435