-->

Nashe Kelz

Blogger

Mix and Mastering

Graphic Design

App Development

  • How To Get Your Kick And Bass Play Nice


    Drums and bass play a very important part in Hip Hop production, as it is the foundation of what makes our beats sound great. However, many times there are drum kicks that just don't sound right, and a lot of that is because it doesn't blend well with the bass notes. Here's how to fix that.

    The Kick Drum

    The best way to get your kick drum to sound better is to mess around with the EQ. A lot of times, producers tend to apply compression to the drums as soon as possible, but compression is something that should be used sparingly. What you have to remember is that the kick drum is also known as the bass drum. So think about that for a second - the bass drum. That should tell you that the kick drum SHOULD go in unison with the bass, as it's so closely related.

    When processing with EQ, the main frequency range you will want to mess with is from 60Hz to 150 Hz. Boosting the 60-80 Hz range is where the kick will really thump, if that's what you're looking for, and cutting around 150 Hz will give you a classic EQ for a kick drum. Then, boosting the highs around the 3 kHz range will add some clarity to the kick so it won't sound muddy along with the bass.

    The Bassline

    This is where it can become tricky, but it doesn't have to be. When you EQ the bassline, you're basically going to do the opposite of what you did with the kick. Cut around 60-80 Hz, boost around 150 Hz, and boost the highs around 800-900 Hz. When doing this, you have to visualize it because it's much easier that way. You're taking away from the kick and substituting that range by increasing the bass notes.

    At this point, your kick and bass should sound great together, but it's not always that simple. The main thing I always see (and experience myself), is that even if you EQ properly, the kick and bass might just not sound good together.

    Make Them Fit

    A lot of producers are using the famous 808 kick drum on their tracks, and rightfully so. The 808 is super dope, and it sounds great on any beat you make since it thumps hard and acts as a bassline at the same time.

    But problems arise that don't need to. The 808 is actually not a drum sound at all, rather, it's a synthetic pulse! The attack, decay, and sustain have all been tweaked so that it sounds like a boomy kick drum, but that's not the case at all.

    So with that in mind, it should be very easy to have your 808 kick and drum kick sit well in the mix. The 808 kick is in the 20-80 Hz range, but when mixing, just use your ears and you'll be fine.
    Conclusion

    My advice is to let your ears guide you (and common sense too). A synth bass might work with an analog drum break, but it might not. If you're going to use synth bass, then use synth drums, and the same goes for analog. But once you have the right combination of kick and bass, it's really just a matter of EQing and mixing them properly until they sound dope. Good luck!
  • BEAT MAKING TIPS


    If you ever listened to a DJ doing incredible mixes between two songs, it's because they just know the song. They know where all the parts of the song are such as the verse, chorus, intro, and outro. Because of this, they know when it's the right time to start mixing in the next song and how to make the mix sound great. It's almost as if the DJ was part of the team when that song was produced.

    The reason why a DJ knows certain songs so well is because they study music. Not in the sense that they went to college to learn music, but rather they pick apart songs when they listen to them, so in a way they are essentially a student of music.

    As a beatmaker, it's very important that you do the same thing. You should know some of the classic Hip Hop tracks all the way back to the early 1980s, as well as most of the songs that were sampled over the years, like Impeach the President and Funky Drummer. Some may argue that you don't need to know all of that history, but I think you do. If you were to listen to old school Rap music and study how the producers, rappers, and deejays back then did what they did, it will open up a whole new world to you.

    If you were to look back at the 1990s of Hip Hop, you can tell that the producers at the time had a heavy influence from songs in the 1980s. The drums were hard and a lot of breakbeats were used, which is what transitioned to the 1990s style of music.

    Bars

    With Hip Hop beats, most of the time you will hear 4-bar loops. Whichever beat making program you use, just take a look and you will see a numbered grid that shows you what bar you're on. Bar counts are designed like this:1-2-3-4, 1-2-3-4, 1-2-3-4, 1-2-3-4. That's 4 bars. As you can see, there are 4 parts to each bar. It's pretty standard, but you can also extend your loop to 8, or 16, or any number you would like. If you're still not sure about how bars work in the program you're using, then check out the manual of the program, as it will most likely explain it.

    Making a Loop

    As a new student who is just beginning, you will always want to start your project first with a drum loop. The reason for this is because it allows you to get used to timing and tempo. It may seem simple to some, but there are people that have trouble staying on beat when they want to play certain instruments, such as the piano. By having a drum loop set up first, then all you have to do is follow the loop and stay on beat.

    Step Sequencing

    If you take a look at some old school drum machines, they all had a feature called Step Sequencer. It's a feature that makes it dead simple to create a loop, especially for drums. This is why I recommend you to use FL Studio as your first DAW. By using a step sequencer, all you have to do is click on where you want your drums to be on the sequencer line.
    This is how it works:
      
     As you can see, it's very simple. In this example there are 16 steps and 4 instruments: kick, clap, hat, and snare. So all you have to do is decide where you want those four instruments to be. You just have to set your tempo and then as the software loops over and over, you can place the hits wherever you wish.

    The great thing about doing it this way is that it's so easy to edit your loop, like if you want to move the position of where the instruments are.

    Don't Worry About Creating a Full Song

    A common problem with someone that is new to beat making is that they get frustrated when their beat sounds nothing like that of a popular song they know well. It could be for various reasons, but most likely one of those reasons is because they are focusing on making a full song rather than just a loop.

    When you listen to some of your favorite Hip Hop tracks, you must pick it apart and try to hear each loop that makes up the full song. Making a beat is done in stages, so that is why working on a simple loop is absolutely necessary first. Even if it's just a drum loop, at least you have a foundation for a full song or full instrumental.

    So when you first start, just create a drum loop and make it sound as good as possible. Once you do that, then you can slowly add in other instruments as you progress to a complete beat.

    Making The Beat

    When creating your beat, you must first decide what you want the final product to be. Is it going to be a beat that you sell to a rapper? Is it going to be a beat that you put together with other beats as an instrumental album?

    One of the most common mistakes I hear all the time with beat makers is that they make beats without thinking further ahead. I'm guilty of this too, but it's only natural since making beats is all about being creative and making it sound great. Beat makers aren't necessarily producers, so the beat is always the first thought, where as a producer is always worried about the overall product.

    If you want to make a beat just as an instrumental, then the sky's the limit. You can add scratching, vocal snippets, and whatever else you can think of. On the other hand, if you wish to make a beat for a rapper to record their vocals over, then you have to step back and think about how you want to approach it.

    The first thing you should do is think about open space. One of the best techniques I've ever heard was from the 1990s when beats would have a hook and then when the verse part came in, the hook part was still there, but it was filtered out. It was a common technique.
     Another technique is to simply remove certain instruments from the beat when it's time for the vocals.

    It's true that there are plenty of Hip Hop beats that had all sorts of sounds and instruments playing throughout the beat, even with the vocals on top, but it doesn't always work.

    Bass lines Are Important, But Not Always

    A very annoying step in the beat making process is that of the bass line. Let's face it - bass is not glamorous. It just sits there and thickens the beat, but if you really listen to it, it's very important. If you were to listen to some of your favorite songs but with the bass lines removed, they would sound completely different.

    I always recommend that bass lines be added to a beat, but there are times when it's just not needed, or very little. You could add an 808 kick drum to your beat, and have that play on the first kick of the first bar, and that alone would be enough.

    If you do add a bass line then the simplest way is to follow the kick, and maybe even have a higher note on the 4th bar:



    All you have to do is get the bass note to be at the same key as the lead instrument (and make sure they sound great together), then just follow the first kick of each bar. Once you do that then play around with other bass notes and see what fits and what doesn't. Be creative!play around with other bass notes and see what fits and what doesn't. Be creative!


    Continues! subscribe so that u wont miss any
  • HOW TO MAKE BEATS


    In this section, I will explain how to make beats, more my way. But you don't have to follow my ways; you can definitely get a good idea on how you can incorporate it into your own work flow. 

    For years I've always started with drums first. This allowed me to get into the right mindset and "vibe", plus it also acted as a guide as I added other instruments while the drum track was looping. It's a great way to start your beat, but it's not the only way. 
    This may seem a bit more complicated for those that are not used to it, but you can also do drums last. I know it sounds weird to some, but it all depends on what you want to do with your beat. 

    Let's say you have a sample that you want to chop up into four parts (1 part for each bar) and have it as a 4-bar loop. This can be accomplished easily since it matches up at the start of each bar. The same can be done if you're using virtual instruments, as long as you're putting the sounds at the beginning of each bar. As you keep adding parts like this, then you'll eventually have a few tracks of instruments that sound pretty much complete and all you have to do now is add the drums. 
    One trick that you can also do is use the metronome as your guide instead of the drums. All DAWs have a metronome count-in that can also be played as you are recording, which of course will help you stay on tempo. 

    The Drum Track 
    You must always remember that the drums are the backbone of your beat. Without drums, you beat wouldn't actually be a beat, rather it would be instruments just blended together. How you do those drums are very important, so make sure your drum track always sounds dope. 

    like to keep my drums simple with a kick, snare, and hat. You can add in toms and cymbals later on, but the "meat" of it is just those three drum sounds. 
    As for the pattern, it all depends on the type of beat you're trying to make. If it's a laid-back beat then of course you won't want to have your drum track be a crazy pattern, so it's best to keep it simple. Even for faster tempo beats, you don't need a busy pattern because remember this is Hip Hop. You're not making an EDM-style beat! 

    Your best bet is to always do kick-snare, kick-snare, and the hat all the way through. That's a typical drum beat with a 4/4-time signature, which is pretty much the default for most beats. You could definitely leave your drum pattern like that, but you can also just add in an extra kick here and there, as well as the snare. What's great about drums is that you can do little tricks to give it a bit more flavor. 

    Instead of just having a kick and snare, you can also add a pre-kick or pre-snare, which is the same sound but at a lower volume, and it can be thrown into your pattern wherever you feel it sounds good. Most likely they will sound great if you place them just before the main kick or snare, but it's just a matter of preference. Normally I leave my hats as a standard pattern, but they can be changed up as well with just slight variations.

    Blending Samples Together 
    A lot of the most famous Hip Hop beats of all time were put together by sampling entire loops, rather than chopping them up into individual sounds. I didn't know this when I first became a fan of Rap music but when I leant how those beats were done, I thought it was great that those producers were able to find a really good sample and use it as a full beat, but it also seemed too easy. Either way, the beats sounded great and that's why they were so popular, and really that's all that matters. 

    But a lot of beats are done with the use of one main sample, meaning that it's a sample from one source. Beatmakers will sample a certain song, chop it up and make a beat from it, but not many will take it a step further and add samples from other songs, even from other artists. 
    I try to do the same thing when I'm making a beat. I may not sample from dozens of songs, but many times I will use one main sample and then add in smaller samples from other sources, and it makes a huge difference. By doing it like this, it really changes the way the beat sounds because it's not just one sample that's being flipped, and it gives the beat a different sound altogether. 

    The same technique can be used when using virtual instruments. There are many times when I will use a synth from a Cakewalk VST plug-in such as a Rhodes piano, and then I will also use a synth from Native Instruments, like strings or a pad lead. 

    Synths and Samples as One 
    Layering various sound sources together is a great technique, but what about samples and synths together? It works, and it's a really good way to get a unique sound. 

    One trick I like to do is I have a sample as my main lead track. I can leave it like that, or I can also add a virtual instrument to compliment my lead. So what I usually do is I will load up something like piano, strings, or a pad, and just keep playing certain notes until it matches the same key as my lead sample. Once I know the proper key then all I have to do is get creative and play out a pattern. 

    The benefit of adding a synth to a sample is that it changes the way everything sounds, but it also gives the option of dropping out the sample at certain spots and have just the synth playing, just to change it up. The main thing you must remember is that the synth must be in the right key, otherwise you will have a hard time getting it to sound right. 

    Finishing It Off with The Bassline 
    Just as with the drums, sometimes I will start my bassline first, but many times I add it lasts. Basslines are tricky and many beat makers don't like doing them for obvious reasons, but I always find the best thing to do, just as with the synth I mentioned previously, is to get it in the right key. 

    The thing with basslines is that most of the time you can cheat, meaning that you don't need a fancy pattern, but just something that will fill in that low-end. You could have a base hit at the beginning of each bar and build from there, or you can play a pattern, most likely something that follows the lead instrument. 

    Let's say you have a lead instrument that has a certain pattern. All you have to do is make a bassline that follows that same pattern, but the tricky part is to get the bass to sound in tune with the lead. Once you get that right bass note, then you're good to go. You can keep the pattern the same or just alter it a bit, but the main thing is the key - it's very important.
  • GET A FREE BEAT

    0
    Twitter
    0
    Instagram
    0
    Facebook
    0
    Behance

    Nashe Kelz

    Nashe Kelz is a music producer, beat maker/producer, app/web developer from the H-Town (Harare, Zimbabwe). All this comes within the same individual. His work is just different from the rest he has managed to stand out of the crowd and started making something of his own for instance his beats, they're just exquisite.
    Read more.

    Me

    My Professional Skills

    Graphic Design 90%
    App Development 25%
    Producer 95%

    EMAIL

    info@nashekelz.com
    beats@nashekelz.com

    PHONE

    +263 7735 63840
    +263 7339 63435